1.3.12. Equipment of salon

Forward coaster

Fig. 1.94. Coaster


For opening press a coaster cover with a symbol (fig. 1.94).
For installation of a coaster in a starting position push it completely back until fixing.

ATTENTION
During the movement of the car do not put hot drinks in a coaster. Hot drink can spill and cause burns.
Do not use firm glasses for drink (for example, from glass, porcelain). At accident they can break.

Coasters in a forward dividing armrest

Fig. 1.95. Forward dividing armrest




Fig. 1.96. Coasters in an armrest



Opening of an armrest
Press the button.
In a forward dividing armrest it is possible to place at most two drinks.

Coasters in a back dividing armrest
For opening of coasters press a symbol And (fig. 1.97).

Fig. 1.97. Coasters in a back dividing armrest



Installation of the holder
For installation of the corresponding holder In deblock him pressing in the direction of an arrow and at the same time adjust situation.
Adjust position of the holder that it densely adjoined to drink.
In a dividing podlokotni it is possible to place at most two drinks.

Forward ashtray
For opening press a forward level of an ashtray And (fig. 1.98).

Fig. 1.98. An ashtray in the central console


Extraction of a plug-in element
Take a plug-in element B for side deepenings and take it up.

Installation of a plug-in element
Establish a plug-in element in a nest by pressing.

Back ashtray
For opening of an ashtray – open a cover.

Extraction of a plug-in element

Fig. 1.99. Back ashtray


Take the case for an open cover and take (fig. 1.99) up.

Installation of a plug-in element
Open a cover of a plug-in element and to press a plug-in element against the stop in a nest.

Lighter
The socket located in a lighter nest on 12 volts can use for connection of additional electric devices.

Use of the lighter
The lighter turns on the boss's utaplivaniye.
Wait for pushing out of the boss.
After that at once take the lighter from a nest.
Light a cigarette from the heated heating spiral of the lighter.
Install the lighter in a nest.

Use of the socket
Take the lighter.
Install the electric device plug in a lighter nest.

Fig. 1.100. Lighter of the central console


The ordinary socket located in a lighter nest on 12 volts can use for connection of additional electric devices with a power consumption no more than 100 watts of (fig. 1.100).

ATTENTION
Be careful when using of the lighter. Inattentive or uncontrolled use of the lighter is fraught with danger of burns.

The lighter works also at the switched-off ignition, i.e. and after extraction of the ignition key from the lock.
Electrosockets and by that the connected electric devices work also at the switched-off ignition, i.e. and after extraction of the ignition key from the lock. Use only suitable plugs not to damage the socket.

The socket in a luggage carrier
The socket on 12 volts can use for connection of additional electric devices.

Fig. 1.101. The socket on 12 volts located in a luggage carrier


Take away a cover of the socket (fig. 1.101) up.
Install the electric device plug in the socket.
The socket on 12 volts can use for connection of additional electric devices with a power consumption no more than 100 watts.

Ware box
The ware box can be locked. At an open cover illumination of a box joins.

Opening of a ware box

Fig. 1.102. Ware box


Pull the handle located in a cover in the direction of an arrow and open a cover (fig. 1.102) down.

Closing of a ware box
Close a cover that it was recorded.
Illumination of a ware box joins during the opening of a cover and the included headlights / parking fires.
In a cover of a ware box there are clamps for fastening of writing-materials.

Case

Fig. 1.103. Case of the central console


For opening press a cover (fig. 1.103).
For closing push a case completely back until fixing.
In the central console near the emergency brake there is one more compartment. On cars with system of navigation on the place of this compartment governing bodies of system are located.

Niche for storage of the folder with documents

Fig. 1.104. A niche for storage of the folder with documents under a steering wheel


It is convenient to store documents and some small objects (fig. 1.104) in this niche.

Niche in facing of doors

Fig. 1.105. Niche doors


In internal facing of doors niches (fig. 1.105) are also located.

ATTENTION
You store only small objects which are not acting from a niche in niches of facing of doors. Otherwise the area of coverage of side safety cushions is limited.

Hangers (hooks for clothes)
Over each of back doors the hook for clothes is located.

Fig. 1.106. Hanger of a back door



ATTENTION
When using of hangers you watch that the clothes did not break a rearview.

Hang up only light clothes. In pockets there should not be heavy and acute-angled objects.
For the purpose of ensuring protective function of head safety cushions use of hangers coat hanger for clothes is not allowed.

Niche for audio cassettes
Audio cassettes can are stored (without cases) in the sliding compartments which are cleaning up in the niche intended for them.

Fig. 1.107. A niche for cartridges of the central console


For opening of a compartment press the button (fig. 1.107).
The cartridge is put in a compartment by the open party up.
For closing push a compartment completely back until fixing.
When finding the cartridge in a compartment on the left side of a compartment the red tag appears.
Blocking of coils prevents spontaneous unwinding of a tape and by that its deformation.

Ware boxes of front seats

Fig. 1.108. The face party of a front seat with the put-forward box


From the face party of each of front seats there is a sliding ware box (fig. 1.108).
For opening of a box raise the handle and nominate him.
For closing completely insert a box until its fixing.

NOTE
The maximum loading of a box makes 1 kg.

Lifting loops
For fastening of pieces of baggage in a luggage carrier there are four lifting loops.

Fig. 1.109. Arrangement of lifting loops of a luggage carrier


By means of lifting loops it is possible to fix freight (fig. 1.109).

The cargo holding grid (laying grid)
The grid interferes with the shift of easy freight in a luggage carrier and can be used also as a laying grid.
Gruzouderzhivayushy grid

Fig. 1.110. The tense cargo holding grid


Fix a grid for four lifting loops (fig. 1.110).
Laying grid

Fig. 1.111. The holding grid suspended for freight hooks


To pass hooks of a laying grid throughout the lifting loops located in the bottom of a back of a luggage carrier (fig. 1.111).
By means of a plate take away the fixing hooks located in the top part of a luggage carrier down And, pull a grid up and fix loops of the cargo holding grid for hooks (fig. 1.111).
Hooks can also be used for suspension of bags, packages, etc.
If hooks are not used, then they come back independently to a starting position.

ATTENTION
The laying grid is calculated on objects weighing no more than 5 kg. The grid does not provide reliable fastening of heavier objects.

Sheeting (bathtub)

Fig. 1.112. The straightened sheeting in a luggage carrier


When transporting of the polluted objects follows use a sheeting (fig. 1.112).

Fig. 1.113. A sheeting of the put back of a back seat



Increase in the sizes of a luggage carrier
For increase in the sizes of a luggage carrier it is possible to put both components of a back together or separately forward.
Wring out the unlocking handle A in the direction of an arrow

Fig. 1.114. The unlocking handle

(fig. 1.114).
Put a back forward.

Return of a back to a starting position
Take away a back until its reliable fixing of Century back. At the correct fixing of a back red marking of a pin should not be visible.

Locking of a back

Fig. 1.115. Locking of a seatback


Turn inserted into the lock of the unlocking handle (fig. 1.115) to the right.

Unlocking of a back
Turn the key inserted into the lock of the unlocking handle to the left.
Correctly recorded back of a back seat (normal situation) can be locked and unlocked only the main or emergency key (the lock is in the unlocking handle). Thanks to it undesirable penetration into a luggage carrier from interior of the car is prevented.

ATTENTION
The back has to be reliably latched on a clamp for ensuring protective action of a belt of an average seat.
The back has to be reliably latched on a clamp that at sudden braking there was no shift of the objects which are in a luggage carrier forward.
At return of a back to a starting position you watch that seat belts of side seats were in a lentonapravlyayushchy trench. Otherwise belts can get to the back lock that can lead to their damage.


Ware shelf
The ware shelf behind a back of a back seat can ispolzvatsya for light articles of clothing.

ATTENTION
On the ware shelf do not put heavy or firm objects. At sharp braking they can injure the people who are in the car.
Remember that the objects rubbing about back glass can damage system of its electrical heating.

NOTE
For ensuring normal air exchange do not cover with things the exhaust cracks which are on a joint of back glass and the ware shelf.