2.3.11. Removal and a press fitting of the needle bearing in the crankshaft

NOTE
The needle bearing in the crankshaft has to be installed in engines of cars with the mechanical transmission. If necessary install the needle bearing.

Extraction

Fig. 2.129. Extraction of the needle bearing


Take the needle bearing by means of an internal stripper and a countersupport (fig. 2.129).

Press fitting

Fig. 2.130. Press fitting of the needle bearing


Press the needle bearing a mandrel or a centering mandrel aflush (fig. 2.130).
The marked party of the needle bearing has to be outside in the established state.