2.8.8. Replacement of an epiploon of the crankshaft from the chain drive

Remove the check point.

Cars from the manual transmission
Remove press a clutch plate and a two-mass flywheel.

Cars with the automatic transmission
Remove the conducted clutch plate.
Take an epiploon by means of the lever.

Fig. 2.318. Extraction of an epiploon


Clear a working and landing surface (fig. 2.318).
Install the adjusting tool on the expansion plug and get an epiploon And on the expansion plug.

Fig. 2.319. The scheme of a motazh of an epiploon on the adjusting tool


Take the adjusting tool (fig. 2.319).

Fig. 2.320. Installation of the expansion plug with an epiploon on the crankshaft


Install the expansion plug with an epiploon 1 on the crankshaft (fig. 2.320).

Fig. 2.321. Epiploon press fitting


Epiploon with the plug evenly press aflush (fig. 2.321).
Further installation is carried out in the return sequence.

Cars from the manual transmission
Establish press a clutch plate and a two-mass flywheel.

Cars with the automatic transmission
Establish the conducted clutch plate.
Establish the check point.