3.1.3. Removal and installation of the sensor on a coupling pedal

Fig. 3.4. Pedal knot of cars with the left wheel: 1 – basic pillow; 2 – basic finger of pedals of coupling and brake; 3 – safety lock; 4 – the screw with an internal hexagon, 25 N · m; 5 – brake pedal; 6 – sensor of provision of a pedal of coupling; 7 – the screw with an internal hexagon, 5 N · m; 8 – coupling pedal; 9 – safety lock; 10 – capture; 11 – the screw with an internal hexagon, 20 N · m; 12 – main cylinder; 13 – servopruzhina; 14 – the sensor on a coupling pedal for start of the engine; 15 – bolt of Torx, 25 N · m



NOTE
To guarantee sufficient reliability of landing, the sensor of a pedal of coupling is allowed to be installed only once.

Dismantle
Remove a ware box from the driver.

Fig. 3.5. Shtekerny socket and sensor of a pedal of coupling


Disconnect the shtekerny socket 1 on the sensor of a pedal of coupling (fig. 3.5).
Unblock the sensor of a pedal of coupling by the 2nd turn on 45 ° to the left and take from a guide.

Installation

Fig. 3.6. Extraction of a pusher


Before installation of the sensor of a pedal of coupling completely take a pusher (fig. 3.6).
The pedal of coupling has to ostvatsya in non-working situation (is not pressed).

Fig. 3.7. Installation of the sensor of a pedal of coupling


Conduct the sensor of a pedal of coupling through an assembly opening, vlavlivy a pusher in a pedal of coupling and fix the sensor by turn on 45 ° (fig. 3.7) to the right.
Connect the electric plug of the sensor of a pedal of coupling.
Establish a ware box from the driver