3.2.5. Removal and installation of a knob with a cover

Fig. 3.52. Assembly position of the drive of gear shifting: 1 – cable of inclusion of transfers; 2 – cable of the choice of transfers; 3 – connecting cable; 4 – lever of switching of the check point



Removal and installation of a knob with a cover

NOTE
The knob is removed together with a cover of the lever of switching and the panel of the central console.

Removal
Open an ashtray.

Fig. 3.53. Removal of the central console


Unblock the panel of the central console and lift it (fig. 3.53) up.

Knob with a tightening collar
Turn inside out a cover, having closed a knob.
Unclench a collar and remove a knob together with a cover.

Knob with a clamp

Fig. 3.54. Unblocking of a connecting part


Unblock connecting part 1 and remove a knob together with a cover in the direction (fig. 3.54) up.

Installation
Installation is carried out in the return sequence.