4.1.28. Removal and installation of the case of the metal gate

Pass the metal gate with rubber consolidation through a rim from within.
Put on outside a podkladny washer, a cap nut and tighten.

Fig. 4.34. Fixing of a key screw-driver


Fix from a provorachivaniye an emphasis 1 (for example, a drill with a diameter of 2 mm) (fig. 4.34).

Fig. 4.35. EBK installation


Press the electronic equipment of a wheel 1 into depth of a rim and fasten behind on the gate the microencapsulated bolt (fig. 4.35).