4.3.9. Removal and installation of the top lever

Removal
Remove a depreciation rack

Fig. 4.79. Removal of the top lever


Turn off nuts 1 and remove screws 2 (fig. 4.79).
Take levers 3 and 4.

Installation
Fix the top levers 3 and 4 by new screws 2 and new nuts 1 so that position of levers could be changed.

Top forward lever of a suspension bracket
You will expose height of "a".

Fig. 4.80. Top back lever of a suspension bracket


A = 81 mm ±2 mm (fig. 4.80).

Continuation of the top forward and back lever of a suspension bracket
You will expose height of "a".

Fig. 4.81. Continuation of the top forward and back lever of a suspension bracket


A = 70 mm ±2 mm (fig. 4.81).
Put the clamps of 1 (fig. 4.79).
Check position of the top levers.
If necessary to repeat exposure operations
Establish a basic arm.