4. Running gear

Wheels and tires
 General information on wheels and tires
 Specifications for re-equipment of disks and tires
 Indexes of speed of tires
 Marking on disks
 Compound disks
 Wear and hodimost of tires
 Wear of high-speed tires
 Service of tires
 Evenly worn-out tires
 Measurement of height of the drawing of a protector
 Unilateral wear
 Diagonal uneven wear
 Noise of swing of tires
 Balancing
 Radial and side beating of wheels and tires
 Check of a radial and side beating of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435
 Minimization
 Side withdrawal of the car
 Elimination of side withdrawal
 Damages of tires
 Design of the radial tire
 Loss of pressure of air in tires
 Damages of tires because of mistakes when mounting (assembly damages)
 Marking of a sidewall of the tire
 Shift of wheels
 Instructions on replacement and installation of wheels
 Change of tires
 Removal and installation of the case of the metal gate
General information about a running gear of the car
 Running gear
 Leakage of shock-absorbers
 Noise in shock-absorbers
 Check of the removed shock-absorber
 Check of shock-absorbers at the damping stand
 Dynamic-Ride-Control system (DRC II)
 Forward depreciation rack
 Check of pressure in the DRC II system
Repair of a suspension bracket of forward wheels
 General provisions
 Wheel support loading own mass of the car
 Removal and installation of a depreciation rack
 Repair of a depreciation rack
 Removal of a screw spring
 Installation of a screw spring
 Removal and installation of the case of the stupichny bearing
 Repair of a rotary fist with the installed hug bearing
 Removal and installation of the top lever
 Replacement of forward and back support of the top levers
 Removal and installation of a stretcher
 Replacement of support of a stretcher
 Removal and installation of persistent wedges of rubber-metal support
 Removal and installation of the stabilizer
Back suspension bracket
 Removal and installation of a twisted spring
 Removal and installation of the shock-absorber
Tables
 Table 4.1. Identification of parameters of a disk
 Table 4.2. The ordered serial pressure of air depending on extent of loading at cold tires
 Table 4.3. Admissions of a radial and side beating of disks with tires
 Table 4.4. Nominal rates of a radial and side beating of a wheel
 Table 4.5. Explanation of the size of tires
 Table 4.6. Alphabetic references of an index of speed / the most admissible speed
 Table 4.7. Index of loading of tires
 Table 4.8a. A shock-absorber piston stroke (cars with number VIN to 400 000)
 Table 4.8b. A shock-absorber piston stroke (cars with number VIN from 400 001)