6.3. Repair of brakes of forward wheels

Removal and installation of brake shoes
Brake of forward wheels of FN3
Removal and installation of brake shoes
Ceramic brake of forward wheels of CSIC
Removal and installation of brake shoes
Removal and installation of brake shoes (brake of back wheels of C38)
Brake of back wheels of RS4 (TIP 8ES)/S43
Removal and installation of cables of the parking brake, cars with the forward drive
Removal and installation of cables of the parking brake (cars with the four-wheel drive)
Removal and installation of the lever of the emergency brake
Removal and installation of a basic pillow for a brake pedal




Fig. 6.28. Components of a forward brake: 1 – cover of a brake disk; 2 – flange bolt, 10 N · m; 3 – brake hose; 4 – spring bracket; 5 – brake pipeline, 15 N · m; 6 – самоконтрящийся bolt, 30 N · m; 7 – bolt, 190 N · m; 8 – a bracket holder with the directing fingers and a protective cap; 9 – brake disk; 10 – wheel bolts; 11 – TORX screw; 12 – heat-shielding screen; 13 – case of a brake support; 14 – holder; 15 – a bolt with a six-sided head, 10 N · m; 16 – brake shoes; 17 – shtekerny connection; 18 – holder



NOTE
After replacement of brake shoes several times strongly press a brake pedal. It is necessary in order that brake shoes reached the working position.
For pumping of brake fluid from a broad tank use capacity for pumping out which adjoins only to brake fluid. Brake fluid is toxic agent therefore it cannot be pumped out a mouth through a hose at all.
When replacing components of the brake system (a brake disk, a brake support or a brake shoe) surely pay attention to correctness of identification. The correct identification as the car is an initial condition for correct work of the ESP system.