6.4.9. Removal and installation of a rotor on a back axis

Removal
Lift the car.
Turn off a wheel.
Turn off a brake support.
Suspend a brake support, having fixed it on a body.
Check a rotor for existence of pollution and damages.
If the rotor has damages, then it is necessary to remove a power shaft with a rotor and to replace the external hinge.

Installation
Installation is carried out in the return sequence.
Again lay a rotation frequency sensor wire how it lay before removal.
Grease a sealing ring of the sensor of frequency of rotation before installation on perimeter with plastic lubricant.

NOTE
If the rotor has damages or is polluted, then the power shaft should be removed. At damage it is necessary to replace the external CV JOINT together with a rotor.

The external CV JOINT with a rotor is delivered as the uniform spare part.