7.5.1. Removal and installation of the control unit of a combination of devices
NOTE
It is forbidden to disassemble the control unit of a combination of devices.
|
Removal
If the combination of devices (the control unit of a combination of devices) is replaced, will choose the Replacement function of the control unit of a combination of devices in the Conducted Search of Malfunctions menu.
Switch off ignition and pull out the ignition key.
Establish a steering wheel back and down so, as far as possible, using for this purpose the full range of adjustment of provision of a steering column.
NOTE
For the best perception working operations are shown in the following drawing at the removed steering wheel.
|
Fig. 7.76. Removal of a cover of the control unit of a combination of devices
|
Uncover 1 below on the control unit of a combination of devices of the movement (arrow) (fig. 7.76) back.
Fig. 7.77. Screws of fastening of a combination of devices
|
Unscrew screws (shooters) (fig. 7.77).
Fig. 7.78. Removal of a cover of the forward panel
|
Uncover at the left on the forward panel by means of a stripper (fig. 7.78).
Fig. 7.79. Promotion of the dashboard
|
Push a hand over a block of safety locks through an opening And yes to squeeze out the control unit of a combination of devices in the direction B (fig. 7.79).
Fig. 7.80. Safety bracket of an electric cable
|
Open a safety bracket of an electric cable and pull out electric connections (fig. 7.80).
Installation
To carry out installation in the return sequence.