7.5.12. Removal and installation of the block of the main safety lock – cars with the accumulator in a motor compartment

Disconnect a weight wire in the accumulator at the switched-off ignition.
Extend rubber laying of a cover of the water taking away box.
Uncover the water taking away box advance.

Fig. 7.107. A safety lock block nut on a positive pole

Cast away a cover 2 aside and turn off a nut 3 electric cables (fig. 7.107).
Turn off a nut of 1 block of a safety lock on a positive pole (fig. 7.107).

Establish in the return sequence.
Connect the accumulator.

Inhaling moments
The safety lock block to a positive pole: 6 N · m.
Electric cable to the block of safety locks: 6 N · m.