7.5.4. Removal and installation of the control unit of onboard network

Removal
If the control unit is replaced, you will choose in the Conducted Search of Malfunctions menu, the Replace Ersetzen/function of the corresponding control unit.
Switch off ignition and pull out the ignition key.
Remove a ware compartment from the driver.

Fig. 7.91. Fastening of the control unit of onboard network


Turn off nuts (arrow) and remove the control unit of onboard network 1 (fig. 7.91).
Unblock blocks of safety locks 1–3.
Unblock a safety bracket of the socket 4 and remove it.

Fig. 7.92. Sockets of the block of safety locks


Disconnect sockets 5 and 6 (fig. 7.92).

Installation
Establish in the return sequence.
Establish a ware compartment from the driver.

Inhaling moment
The control unit of onboard network to the central pipe of the forward panel: 2,4 N · m.