8.1.26. Removal and installation of a cover of a luggage compartment

Removal
Remove an upholstery of a back cover.
Disconnect and remove electric sockets and a hose of a washer of back glass.
Open a cover of a luggage compartment and prop up.

Fig. 8.47. Removal of a gas support


3 raise the holding spring by means of the screw-driver according to the figure 8.47 and pull together a gas support 1 from the top spherical head 2.

Fig. 8.48. Removal of facing and kabeleprovod


Remove facing of 1 hinge of a cover of a luggage compartment and кабелепровод 2 from the hinge of a cover (arrow) (fig. 8.48).

Fig. 8.49. Removal of a support


Turn off bolts (shooters) (fig. 8.49) at the left and on the right.
The assistant is necessary for support and removal of a cowl.
Uncover a luggage compartment.

Installation
Installation is carried out in the return sequence.
The inhaling moment at installation of 21 N · m.

Insert of the isolating rug in a cover of a luggage compartment
In a new cover of a luggage compartment follows after varnishing on a surface, to paste the isolating rugs.

Fig. 8.50. An insert of the isolating rug in a cover of a luggage compartment


Cut the isolating rugs from a noise isolation (self-adhesive) number of a detail of 323 863 950 following sizes (fig. 8.50).
1 – the isolating rug of 100x150 mm (2x)
2 – the isolating rug of 30x100 mm (2x)